RGB e ananeloang e lebisitsoeng ho 0404 (1010 Metric) leds)

E na le tataiso e ananeloang joalo ka rgb?

RGB e ile ea tsamaea, joalo ka lebitso, ho tla ba le 'mala o merabe ka har'a SMD ena. Ther ha e le 4 ka tlase ho smd e ile ea etella pele, kahoo re ka laola 'mala ka ho hokela Preces apohanong. Lerako le tšoaroang, le RGB le ile la rera, ho tla ba le lichifi tse tharo ka bofubelu, botala le boputsoa ka hare. Empa ka nako e tšoanang, hape ho tla haha ​​molato IC ea kahare ho laola mabone. U hloka ho haha ​​sena - ho IC hore ho na le sesupo sa IC se ka sebetsa e le moralo oa hau. Ka nako ena ea 1010rgb-wlic, re paka li-achups tse tharo 'me re ikamahanya hammoho le Lei hammoho ka har'a mini ena ea mini Smd. Mme ka nako e ts'oanang, re boetse re koahela e etelletsoeng pele ka leseli le litsie tse fapaneng ka holimo. Ke eng e ka etsang bonnete ba hore re ka etsa hore mabone a mabone a fapaneng le joale ea 1010 o etelletse pele ho tla sebelisoa haholo morerong oa lipallo.

E ka bang 1010 (4040 rgb led smd boholo:

* Haeba boholo bona ba rgb bo etelletsoa ho fihlella bo hlokahala, 3550 rgb o lebisitse, 509 rgb o lebisitse, 2121 rgb leds

Likaroloana:

• Ha a hahe ka IC ea kananelo e nang le bofubelu, botala le botala le botala le leputsoa le kopaneng la chip.
• E fumaneha ka theipi le reel;
• Mofuta oa lense: o ne a sa khone ho se sebelisoe;
• Marang-rang a Phahameng, haholo Radiation Ternity le bonolo ho motho ea rekisang;
• Demenice ea chip: 305um, 305um, 305um;

Litšobotsi tsa motlakase tsa EXPERAL (TC = 25 ℃ )

Likopo tsa Main:

Mokokotlo oa morao-rao, leseli la leseka;

Taolo ea indasteri;

Lisebelisoa tsa bongaka le lisebelisoa tsa puisano;

Li-electronics tsa ts'ireletso;

Ho sebetsana le Tsokelo ea Tsokelo ea Tsokelo ea Tsokelo:

Bapisa le EPOXY ENKELE e thata le e nang le silingoe e fokotsa khatello ea maikutlo, e ka ba kotsing ea ho senya ka matla a khale. Ka lebaka leo, mehato e ikhethang ea ho itšireletsahang e hloka ho bolokoa nakong ea kopano e sebelisang lihlahisoa tsa lihlahisoa tsa lead. Ho sitoa ho latela ho senya le ho hloleha ha nako le nako

1. Tšoaea karolo ea potoloho libakeng tse ka lehlakoreng la ho sebelisa matla kapa lisebelisoa tse loketseng.

2, se ke oa ama ka ho toba kapa ho sebetsana le leqhubu la lense ea silicone. It may damage the internal circuitry.

3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

4-BA plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.