LED SMD PLCC 2 3528 Blue SMT LED

3528 SMD LED PLCC-2 460nm 465nm Blue SMD LED;

SMD LED na le mefuta ea boholo ba sephutheloana, joalo ka 3528 SMD LED, 5730 SMD LED, 2835 SMD LED, 5050 SMD LED ect. Eo re buileng ka eona kajeno ke 3528 SMT LED, e nang le boholo ba 3.5 * 2.8 * 1.9mm(botenya). Ho tla ba le liphahlo tse peli ka tlase ho SMD LED ho hokahanya potoloho, ntlheng ena, re boetse re reha lebitso la PLCC 2 3528 SMD LED. Re hlahisa LED ena ea Blue SMD e nang le 465nm LED ka hare bakeng sa mohloli oa mabone ka mofuta o tloaelehileng o khanyang.

PLCC-2 3528 SMD ea boholo ba LED:

Litšobotsi tsa LED tsa 3528 SMD:

* Boemo ba SMD LED: 3.5 * 2.8 * 1.9mm;

* Phatlalatso ea pele: 3V e lumellana;

* Wavelength 455-475nm;

* Mofuta oa lense: Hlakola lense

* Ho tšepahala ho hoholo le ho kenella ha mahlaseli a phahameng;

Litekanyetso tsa Motlakase:

* Boemo ba hona joale ba ho ea pele: Mosebetsi oa 1% le bophara ba pulse = 10us.

* Boemo ba soldering: Boemo ba ho solder bo tlameha ho phethoa ka li-secongds tse 3 ho 260 ℃

Litšobotsi tsa Motlakase oa Optical(Tc=25 ℃ )

*Luminous Intensity e lekantsoe ka ZWL600.

*θ1/2 ke off-sxis angle moo khanya e khanyang e leng halofo ea axia luminous intensity;

Sesebelisoa sa mantlha:

* E loketse bakeng sa khanya ea morao;

* Leseli la sesupo;

* Lebone la mekhabiso ea LED;

Lintlha tsa Sehlahisoa:

99.99% ea terata ea khauta e hloekileng;

Sekhahla sa LED se entsoeng ka silevera;

Li-chips tse tsebahalang;

epoxy ea boleng bo holimo;

TSAMAISO EA TŠEBELETSO:

Bapisa le epoxy encapsulant e thata le e brittle, silicone e bonolo ebile e tenyetseha Le hoja tšobotsi ea eona e fokotsa haholo khatello ea mocheso, e kotsing ea ho senyeha ka matla a extemal mechanical. Ka lebaka leo, litemoso tse khethehileng tsa ho tšoara li lokela ho hlokomeloa nakong ea kopano ho sebelisoa lihlahisoa tsa Led tse kentsoeng ka silicone. Ho hloleha ho ikamahanya le maemo ho ka baka tšenyo le ho hloleha ho etella pele pele ho nako

1. Tšoara karolo ka mahlakoreng a mahlakoreng ka ho sebelisa li-forceps kapa lisebelisoa tse loketseng.

2, Se ke oa ama ka ho toba kapa oa tšoara lense ea silicone. E ka senya potoloho ea ka hare.

3, Se ke oa bokella PCBS e kopaneng e nang le li-LED tse pepesitsoeng. Tšusumetso e ka hoa lense ea silicone kapa ea senya potoloho e kahare.

4, 4-A Bophahamo bo ka hare ba sekoti sa SMD ha boa lokela ho feta boholo ba LED ho thibela ho lutla ha moea;

4-BA plible material e khothaletsoa bakeng sa ntlha ea nozzle ho qoba ho hohola kapa ho senya bokaholimo ba LED nakong ea ho nka.

4-C Bophahamo ba karolo bo tlameha ho hlophisoa ka nepo mochining oa ho khetha le ho beha sebaka ho netefatsa hore ho na le pickup e nepahetseng le ho qoba tšenyo nakong ea tlhahiso;

4-D Joalo ka ha silicone encapsulation e kenella likhaseng, lintho tse ling tse senyang joalo ka H2S li ka senya silver plationg ea leadframe. Tlhokomelo e khethehileng e lokela ho nkoa haeba LED e nang le silicone encapsulation e lokela ho sebelisoa haufi le lintho tse joalo.

5, Ka kopo, aviod e tsoela pele ho pepesehela tikoloho ea mongobo 'me u boloke sehlahisoa se le hole le liphetoho tsa repid ka mocheso oa ambiemt.

6, Sehlahisoa se ka har'a sephutheloana se tiisitsoeng sa mantlha se khothaletsoa hore se bokelloe nakong ea lihora tse 24 ho tloha ha se buloa.