Lisebelisoa tsa infrared tsa li-900nm li sebelisoa haholo-holo ka lisebelisoa tsa ho hlahloba khase ea mali le tsoekere ea mali ea 'mele oa motho kapa ho notlela maemo. Wavelength e fapaneng e tla ba le ts'ebeliso e fapaneng. Joalo ka li-LED tsa 940nm li phethahetse bakeng sa sistimi ea taolo ea hole, joalo ka taolo e hole ea lisebelisoa tsa ntlo ect. Leseli la infrared la 800-810nm le loketse lisebelisoa tsa bongaka le tsa litlolo, puisano ea sebaka sa optical, mabone a infrared, mohloli oa pompo ea solid ect. 830nm go la la emitter li ho pharaletseng sebediswa bakeng sa phahameng-lebelo tseleng, jarolla ka ho iketsa karete mokitlane tsamaiso ect. Haeba o hloka emitter ea infrared ea 900nm e nang le boholo bo bonyenyane le sesebelisoa sa holim'a metsi. Leseli lena la 3528 SMD e tla ba khetho e ntle ho uena ~ Iteanye le rona bakeng sa lintlha tse ling!

- Methati ea Methati -

Likhetsi tsena tsa SMD tsa LED le tsona lia fumaneha bakeng sa IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Ho hlahisa mmala -

- Lisebelisoa tsa Motlakase -

Tekanyo e felletseng ea boholo bo holimo ho Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	230mW
Pulse Forward Current	IFP	350mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	2000v
Warranty	Time	5Years
Antistatic bag	Piece	2000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Likarolo tsa Optical le motlakase ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.6		2.2	V	IF=100mA
Pulse Forward Voltage	VF		2.8		V	IFP=350mA
Radiant Intensity	IE	25		32	mw/sr	IF=100mA
Peak Wavelength	λP	890	900	910	nm	IF=100mA
Total Radiated Power	PO		4.2		mw	IF=100mA
Half Width	Dl		50		nm	IF=100mA
Viewing Half Angle	2q1/2		±60		deg	IF=100mA
Reverse Current	IR			5	uA	VR=5V
Rise Time	Tr		600		ns	IF=100mA
Fall Time	Tf		300		ns	IF=100mA
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- LED ea 900nm -

- Khokahano ea terata ea khauta -

- Ho paka -

* Re e paka ka ho e paka ka vacuum kamora ho e theipi joalo ka tepe

- Ts'ebeliso -

- LED e amanang -

- Tlhahiso -

- Sebelisa -