Bakeng sa LED ea 'mala o bonahalang, hangata, re metha khanya ka mcd. Empa bakeng sa tsohle tsa IR LED, yuniti e tla fetoha phetoho ho mw / sr. Matla a khanya a lekantsoeng ka mW / cm² ke paramethara e loketseng haholoanyane. Hobane botebo boo leseli le hlokang ho kenella bo ipapisitse le hore na sehlahisoa se sebetsana le maqeba a bokaholimo ba mmele kapa kalafo e tebileng ea mesifa, e tla ba lintlha tsa bohlokoa boikhetlong ba li-LED mabapi le bolelele ba matla, matla le matla. LED ea 880nm ha se LED e tloaelehileng ea infrared joalo ka 940nm LED kapa 850nm LED. Ho fumanoe hore li-LED tsa 880 nm li ka thusa likotsi tsa mesifa le mesifa tse tsoetseng pele thupelong. Joalokaha u tseba, shenzhen Best LED opto-electroinc co., Ltd ke moetsi ea nang le boiphihlelo oa LED, ea ka pakang lefu lena la 880nm bare le linyeoe tse fapaneng. joalo ka: nyeoe ea 3528 SMD ea LED, nyeoe ea 5050 SMD ea LED, nyeoe ea 2835 SMD ea LED kapa nyeoe e 'ngoe ea lesoba la LED, nyeoe ea 3mm ka lesoba la LED kapa 5mm ka lesoba la nyeoe ea LED. Batla webosaeteng ea rona, haeba u sa fumane e ka fihlelang tlhoko ea hau. Ikutloe u lokolohile ho ikopanya le rona bakeng sa lintlha tse ling.

- Methati ea Methati -

Likhetsi tsena tsa SMD tsa LED le tsona lia fumaneha bakeng sa IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Ho hlahisa mmala -

- Lisebelisoa tsa Motlakase -

Feletseng Boholo Ratings Ha Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	120mW
Pulse Forward Current	IFP	350mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	2000v
Warranty	Time	5Years
Antistatic bag	Piece	2000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Likarolo tsa Optical le motlakase ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4		2.0	V	IF=50mA
Pulse Forward Voltage	VF		2.6		V	IFP=350mA
Radiant Intensity	IE	7		12	mw/sr	IF=50mA
Peak Wavelength	λP	870	880	890	nm	IF=50mA
Total Radiated Power	PO		3.0		mw	IF=50mA
Half Width	Dl		50		nm	IF=50mA
Viewing Half Angle	2q1/2		±60		deg	IF=50mA
Reverse Current	IR			5	uA	VR=5V
Rise Time	Tr		600		ns	IF=50mA
Fall Time	Tf		300		ns	IF=50mA
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Leseli la 880nm -

- Khokahano ea terata ea khauta -

* Bakeng sa ho boloka nako e telele ea bophelo ba LED, fektheri ea BestLED e sebelisa terata e phahameng ea khauta bakeng sa khokahano ea potoloho ea kahare

- Ho paka -

* Re e paka ka ho e paka ka vacuum kamora ho e theipi joalo ka tepe

- Ts'ebeliso -

- E amanang le IR SMD LED -

- Tlhahiso -

- Sebelisa -