- LED ea 600nm -

5050FOC-60L / 14

Joalokaha re bona setšoantšong ka tsela e latelang, ho na le maemo a mararo kahare ho 5050 SMD LED hape ho na le lithakhisa tse 6 bakeng sa khokahano ea hajoale. Ho na le lipini tse tharo ka lehlakore le leng le le leng, 'me e' ngoe bakeng sa cathode le e 'ngoe bakeng sa anode. Bakeng sa ho eketsa khanya kapa mahlaseli ho LED e le 'ngoe, ke tsela e ntle ka ho fetisisa ea ho kenya li-chip tse tharo kahare ho LED hore LED ena e ntlafatse makhetlo a 3. 600nm LED e hlahisa lamunu LED, le uena u ka e reha lebitso la amber LED. 600nm SMD LED li sebelisoa haholo mefuteng ea projeke ea mabone a LED, projeke ea mokhabiso oa LED kapa ect e 'ngoe ea khanya ea LED. Na o hloka LED ea 600nm e nang le khanya e phahameng bakeng sa projeke ea hau? Iteanye le rona bakeng sa tlhaiso-leseling e batsi ka eona. Sena ha se u lumelle ho soetseha.

- teba Parameters-

Likhetsi tsena tsa SMD tsa LED le tsona lia fumaneha bakeng sa IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Ho hlahisa mmala -

Feletseng Boholo Ratings Ha Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Likarolo tsa Optical le motlakase ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.8	2.05	2.4	V	IF=60mA
		2.0	2.3	2.6	V	IF=180mA
		2.3	2.4	2.8	V	IF=300mA
Luminous Intensity	ΦVI	7		14	lm	IF=60mA
		20		30	lm	IF=180mA
		24		30	lm	IF=300mA
Lumiuous Power	PO	20		30	mw	IF=60mA
		55		75	mw	IF=180mA
		80		110	mw	IF=300mA
Peak Wavelength	λP	605	608	612	nm	IF=60mA
Dominant Wavelenth	λd	600	605	610	nm	IF=60mA
Half Width	Dl		15		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- 5050SMD 605nm LED XY -

- Khokahano ea terata ea khauta -

- Ho paka -

* Re e paka ka ho e paka ka vacuum kamora ho e theipi joalo ka tepe

- Ts'ebeliso -

- E amanang le Yellow LED -

- Tlhahiso -

Ts'ebeliso ea LED ea SMD -